Skip to content

Grenadier Pedal Control

Regular price $299.00

Tax included

Drastically improve the drivability of your Grenadier with the newest generation of throttle mapping. Introducing the Pedal Control 2.0.

How does this pedal controller work?

Any vehicle with a turbo can hesitate until the RPMs build enough for the turbo to create boost. Adding oversized tires to your Grenadier can exacerbate the issue. The Pedal Control is a fantastic design that helps alleviate this situation. It works by intercepting the throttle position sensor signal and telling the ECU that the throttle was applied more quickly. This can make a grenadier more responsive and feel more snappy when you have added larger tires (which affect final gearing).


PedalControl Mobile App Individual Mode on the mobile app Sport Mode on the mobile app Eco Mode on the mobile app


Theft Mode

A very useful new feature is Theft Mode. This allows the Pedal Control to interrupt the throttle signal to the vehicle. This means that the vehicle will turn on normally and run but it cannot move. No matter how hard the throttle is pressed the vehicle's ECU will be sent a 0% throttle signal. Therefore rendering the vehicle undrivable. Simply turn theft mode on or off via the app. Great for people who like to leave their keys hidden near their vehicle while they hike or bike. Please keep in mind no theft deterrent can guarantee your vehicle is not stolen. 

Theft Mode on the mobile app

Installation

Simple installation with no permanent modifications to your vehicle. Pedal Control 2.0 daisy chains just above the throttle. It installs in about a minute or two. Then you simply download the app and you can select the program best for you. 

Does not affect the vehicle warranty in our experience as it does not remap or add any HP. The product smooths the power delivery and makes the vehicle more responsive to driver inputs. 

PLEASE CAREFULLY READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE ATTEMPTING INSTALLATION.

Installation at an Owl Offroad is $100 

The Pedal Control 2.0 has been carefully designed and rigorously tested. Please follow all installation instructions.

  1. Turn off the ignition and wait five minutes.
  2. Loosen the plug connection from the original plug adapter.
  3. Attach both OEM connectors to the accelerator pedal sensor.
  4. Lay the cables in such a way that they are securely installed and are not interfering with anything else.
  5. Relocate the Pedal Control to a suitable location.
  6. Launch the app from your smartphone.
  7. Pair your smartphone to the Pedal Control with the default PIN “123456”

Never install or remove it when the ignition system is active. Always switch off the ignition and wait 5 minutes for all electrical systems to power down and fully discharge. Some vehicles may require additional time to power down.

On most vehicles, the connection for the Pedal Control 2.0 is close to the accelerator pedal or the steering column. You must ensure that the Pedal Control and the associated wiring loom do not interfere with the operation of the pedal or the steering and are secured at all times. 

 BY AGREEING TO INSTALLATION OF INTERNALLY MANUFACTURED OWL PARTS OR THIRD-PARTY PARTS PURCHASED THROUGH OWL, YOU THE CUSTOMER ARE ASSUMING THE RISK THAT OTHER WARRANTIES MAY BE AFFECTED AND INVALIDATED AND THAT THE PERFORMANCE OF THE VEHICLE MAY BE AFFECTED. ALL MODIFICATIONS ARE DONE AT YOUR OWN RISK. 

PEDAL CONTROL 2.0 SOFTWARE IS ONLY AVAILABLE FOR USA AND CANADA. WE DO NOT HAVE ACCESS TO SOFTWARE FOR EUROPE OR THE REST OF THE WORLD AT THIS TIME!

California Prop 65

WARNING: Some of the products listed contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. None of our products are intended to be used in conjunction with clean drinking water unless stated otherwise. For more info please visit www.p65warnings.ca.gov.

Canceled Orders

We want all customers to be happy with their purchases but in the event of a canceled order, we cannot recoup the fees charged to us by the credit card companies.

When an order is placed, the credit card company takes a percentage of the sale, typically 5%-6%.

This is money that DOES NOT go to us and we do not get this charge given back to us when we refund an order.

Therefore, if someone buys a suspension and then cancels, we pay the credit card company several hundreds of dollars that we cannot get back.

Although you may not have noticed, it is industry standard for larger dollar items to have a "restocking fee" of 15% or more. We do our best to charge exactly what we get charged by the credit card company when you cancel an order. In the event of a canceled order, the 5%-6% that the credit card company charges us cannot be refunded. Please make note of this before you order. 

• All canceled orders over $1000 paid with a "Credit Card" will have a 5% credit card processing fee that cannot be returned.

• All canceled orders over $1000 paid with a "Shop Pay Installments" will have a 6% credit card processing fee that cannot be returned.

Back to top

Shopping Cart

Your cart is currently empty

Shop now